Home /

1730 1280

Standard sliding glass door kit. Anchoring clamp and a 1280 mm aluminum profile. Maximum load capacity 120 or 175 kg

PATENTED

MADE IN ITALY

SOLUTION: Sliding

DOOR THICKNESS: 8 mm - 10 mm - 12 mm

LOAD CAPACITY: 120 kg / 175 kg

DOOR MATERIAL: Glass

APPLICATION: Standard

Installation examples

Exposed

Exposed with pelmet

Recessed with door frame

Recessed with pelmet

Technical drawings and photos

Find out about basic kit components, tracks, and accessories in the KIT section

System specifications

Features	Value
Solution	Sliding
Door leaf material	Glass
Environment of application	Indoor
Sliding application	Standard
Installation	Inside the wall - Outside the wall
Fixing	Clamp hidden by a trim (requiring perforated glass or not)
Aluminum profile	1280 mm
Door leaf thickness	8 mm - 10 mm - 12 mm
Door leaf width	minimum 460 mm - maximum 1280 mm
Door leaf/track distance	17 mm (± 3 mm)
Soft-close	Optional
Lower guide	Adjustment
Roller hanging screw	Yes

Roller and its load capacity

Nel kit 1730 il carrello, il fine corsa e/o il richiamo anta ammortizzato sono da acquistare separatamente. Di seguito le opzioni di carrello compatibili e le relative caratteristiche.

Roller type	Material	Wheels	Ball bearings	Capacity
0500	Zamak	4 made of POM	4	120 kg
0830	Zamak	2 made of POM	2	175 kg

Features

Hanging with glass clamps not requiring a safety hole in the glass door leaf for a load of up to 80 Kg
Hanging with glass clamps hidden by a trim.
Adjustable floor guide according to the glass door leaf thickness by means of two eccentric cams .
Ball bearings for a sliding of enhanced fluidity and smoothness

Kit

Kit components

What the 1730 880 kit includes

* Spare parts available, *consult the table of spare parts*
Component	Quantity	Figure
Aluminium profile with side covering - 1280 mm	1 piece	1
Clamp	4 pieces	2
Adjustable floor guide *	1 piece	3
Nuts + Screw for clamp	8 pieces	4
Glass seal L=200	4 pieces	5
Fulcrum	n.2 ø3=8 n.2 ø5=10 n.2 ø7=12	6
Pin	2 pieces	7
Rubber bush	1 piece	8
Milled screw	n.2 M8x35 n.2 M8x45 n.2 M10x55	9

Kit completion

Complete the kit with roller, stop brake, track and accessory according to application

Roller and Stop brake

Hardware for panel 120kg	Quantity	Item number
Upper roller - 120kg	2 pieces	0500 52
End-stop with adjustable unfasten force *	2 pieces	0500 12

	Quantity	Item number
Upper roller - 120 kg	2 pieces	0500 52
Upper roller 120 kg with double ABS	1 piece	0500 120 12 ABS

Hardware for panel 175kg	Quantity	Item number
Sliding roller - 175kg	2 pieces	0830 53
Stop brake	2 pieces	0830 4

Tracks

Drilled and anodised aluminium track - 80 kg	Item number
1.8 meters	0500 180
2 meters	0500 200
2.4 meters	0500 240
3 meters	0500 300
4 meters	0500 400
6 meters	0500 1

Drilled and anodised aluminium track - 100 kg	Item number
2 meters	0810 80x200
3 meters	0810 80x900
6 meters	0810 80x400

Drilled and anodised aluminium track - 120kg	Item number
3 meters	0500 10 300
6 meters	0500 10

Drilled and anodised aluminium track - 175kg	Item number
3 meters	0830 2
6 meters	0830 1

Accessories

Component	Item number
Pelmet high cover - 2 meters	0500 A 200
Pelmet high cover - 3 meters	0500 A 300
Pelmet high cover - 4 meters	0500 A 400
Wall fixing - 80 Kg - 2 meters	0500 F 200
Wall fixing - 80 Kg - 3 meters	0500 F 300
Wall fixing - 80 Kg - 4 meters	0500 F 400
Wall fixing - 120 kg - 3 meters	0500 F 10 300
L shape wall fixing - 80 Kg	0500 4
L shape wall fixing - 120 Kg	0500 5
L shape wall fixing - 175 Kg	0850 5
Track end cap	0500 61
Pelmet end cap	0500 64
Extra lower stopper for double door leaf glass	7550 32 NS